The Vertechs LULA
Specifications
Jump to:
Download PDF Specification Sheet with Drawings
General Specifications
- Drive: 1:1 Direct Hydraulic System
- Capacity: 1400 lb. (636 kg)
- Total Gross Load: 3000 lb. (1360 kg)
- Speeds: 30 fpm
- Pit: 13” Min. 36” Max (some conditions apply)
- Overhead: 108in. Min. (2744mm)
- Travel: 25 ft. Max
- Stops: 3 in-line / 4 front and rear
Cab Clear Inside
- 42”w x 60”d x 84”h
- 48”w x 54”d x 84”h
Standard Equipment
- Cab Entrance: Stainless Steel (Brushed Finish)
- Cab Doors: Two speed fully automatic sliding doors (Powder coated beige)
- Landing entrance: Powder coated beige
- Landing Doors: Two speed fully automatic sliding doors (Powder coated beige)
- Door Sills: Clear Aluminium
- Floor: Unfinished plywood (to be finished on site)
- Handrail: Clear Aluminium (Brushed Finish)
- Cab Panels: Fire-rated wood with Plastic Laminate (Formica Finishes)
- Cab Ceiling: Aluminium egg-crate
- Lighting: Automatic on/off (3 florescent light)
- Operation: Selective Collective
- Call Stations: Brushed Stainless Steel c/w illuminated Push buttons
- Car Operating Panel (C.O.P): Brushed Stainless Steel c/w Illuminated push buttons, and emergency light
- Indicator: Digital floor indicator in car
- Telephone: Hands-Free Programmable speaker phone
- Car top inspection station: c/w light and car enable/disable switch
Standard Safety Features
- Backup Systems: Automatically lowers the car to bottom landing and open doors during power failure
- Emergency Lowering: Manual lowering button
- Emergency Stop: Emergency stop switch inside car
- Automatic Door Interlocks: CSA/UL approved interlocks
- Preventing landing door opening when car not at the floor)
- Door Restrictor: Mechanical-Magnetic restrictor (Preventing cab door opening when car not at the landing)
- Line Rupture Valve (LRV): Flow control safety valve
- Auto Re-levelling: Anti-Creep relieving system
- Door-bypass Detection: Detects bypass of door contacts
- Micro-Scan Motion Detectors: (Light Curtains) Detects Objects in front of doors and automatically reopens elevator doors
- Emergency Light: Automatic emergency light during power failure
Mechanical / Hydraulic Data
- Guide Rails: 8lb T-rail (pre-welded for precise alignment)
- Car Frame: direct 701 Cantilever
- Power Unit: GMV Ultima
- Motor/Pump: Submersible for quiet operation
- Control Valve: 2 speed with soft stop
- Jack: GMV Mechanically Synchronized Telescopic
Controls
- Elevator Controller: CSA/TSSA approved Micro-controller based system with solid-state devices (no mechanical relays)
- Wiring: Plug and play harness c/w electrical duct
Power Requirements
- Main and lighting: Single phase, 220V and 110V
Options
- Cab Doors: Stainless Steel (Brushed Finish)
- Doors: Stainless Steel (Brushed Finish)
- Hoistway Access: Easy access to hoistway
- Buffer Springs: (Solid bumpers are standard)
Additional Information
- Limited two year warranty
- Job Specific Layout Drawings
- Detailed Architectural Hoist-way Construction Drawings
- Optional Maintenance Service
- Full pre-tested system
- Installation and Service provided by local dealer
- On time delivery
Download PDF Specification Sheet with Drawings Small Commercial Elevator